unisonic technologies co., ltd pn2222a npn silicon transistor www.unisonic.com.tw 1 of 6 copyright ? 2010 unisonic technologies co., ltd qw-r208-022.d npn general purpose amplifier ? features * this device is for use as a medium power amplifier and switch requiring collector currents up to 500ma. ? ordering information ordering number pin assignment normal lead free plating halogen free package 12 3 packing PN2222A-AB3-R pn2222al-ab3-r pn2222ag-ab3-r sot-89 b c e tape reel pn2222a-t92-b pn2222al-t92-b pn2222ag-t92-b to-92 e b c tape box pn2222a-t92-k pn2222al-t92-k pn2222ag-t92-k to-92 e b c bulk
pn2222a npn silicon transistor unisonic technologies co., ltd 2 of 6 www.unisonic.com.tw qw-r208-022.d ? absolute maximum rating (t a =25 , unless otherwise specified) parameter symbol ratings unit collector-base voltage v cbo 75 v collector-emitter voltage v ceo 40 v emitter-base voltage v ebo 6 v collector current i c 0.6 a sot-89 1.2 total device dissipation to-92 p c 0.6 w junction temperature t j +150 storage temperature t stg -55 ~ +150 note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal data (t a =25 , unless otherwise noted) parameter symbol ratings unit sot-89 104 junction to ambient to-92 ja 200 /w ? electrical characteristics (t a =25 , unless otherwise specified) parameter symbol test conditions min typ max unit off characteristics collector-base breakdown voltage bv cbo i c =10 a, i e =0 75 v collector-emitter breakdown voltage bv ceo i c =10ma, i b =0 40 v emitter-base breakdown voltage bv ebo i e =10 a, i c =0 6 v collector cut-off current i ceo v ce =60v, v eb(off) =3.0v 10 na collector cut-off current i cbo v cb =60v, i e =0 0.01 a emitter cut-off current i ebo v eb =3.0v, i c =0 10 na base cut-off current i bl v ce =60v, v eb(off) =3.0v 20 na on characteristics i c =0.1ma, v ce =10v 35 i c =1.0ma, v ce =10v 50 i c =10ma, v ce =10v 75 i c =150ma, v ce =10v ( note ) 100 i c =150ma, v ce =1.0v ( note ) 50 300 dc current gain h fe i c =500ma, v ce =10v ( note ) 40 i c =150ma, i b =15ma 0.3 collector-emitter sa turation voltage ( note ) v ce(sat) i c =500ma, i b =50ma 1.0 v i c =150ma, i b =15ma 0.6 1.2 base-emitter satu ration voltage ( note ) v be(sat) i c =500ma, i b =50ma 2.0 v small signal characteristics transition frequency f t i c =20ma, v ce =20v, f=100mhz 300 mhz output capacitance cobo v cb =10v, i e =0, f=100khz 8.0 pf input capacitance cibo v eb =0.5v, i c =0, f=100khz 25 pf collector base time constant rb'cc i c =20ma, v cb =20v, f=31.8mhz 150 ps noise figure nf i c =100 a, v ce =10v, r s =1.0k , f=1.0khz 4.0 db real part of common-emitter high frequency input impedance re(hje) i c =20ma, v cb =20v, f=300mhz 60
pn2222a npn silicon transistor unisonic technologies co., ltd 3 of 6 www.unisonic.com.tw qw-r208-022.d ? electrical characteristics (t a =25 , unless otherwise specified) parameter symbol test conditions min typ max unit switching characteristics delay time t d v cc =30v, v be(off) =0.5v 10 ns rise time t r i c =150ma, i b1 =15ma 25 ns storage time t s v cc =30v, i c =150ma 225 ns fall time t f i b1 = i b2 =15ma 60 ns note : pulse test: pulse width 300 s, duty cycle 2.0%
pn2222a npn silicon transistor unisonic technologies co., ltd 4 of 6 www.unisonic.com.tw qw-r208-022.d ? test circuit
pn2222a npn silicon transistor unisonic technologies co., ltd 5 of 6 www.unisonic.com.tw qw-r208-022.d ? typical characteristics
pn2222a npn silicon transistor unisonic technologies co., ltd 6 of 6 www.unisonic.com.tw qw-r208-022.d ? typical characteristics(cont.) 10 100 1000 160 0 collector current, i c (ma) turn on and turn off times vs. collector current time (ns) 80 240 320 400 v cc =25v t off t on i b1 =i b2 = i c 10 10 100 1000 160 0 collector current, i c (ma) switching times vs. collector current time (ns) 80 240 320 400 v cc =25v t s t f i b1 =i b2 = i c 10 t r t d 0.25 0.75 50 025 75 power dissipation vs. ambient temperature 0.5 1 temperature ( ) 150 125 100 0 to-92 sot-89 1.25 utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
